Publicité
Les langues disponibles
Les langues disponibles
Playing Back from the PC
This System is equipped with a USB terminal on the front
panel. You can connect your PC to this terminal and enjoy
sound reproduced through your PC.
When you connect your PC for the first time, follow the
procedure below.
• Remember you cannot send any signal or data to your PC
from this System.
IMPORTANT
• Always set volume to "VOL MIN" when connecting or
disconnecting the other equipment.
How to install the USB drivers
1
Turn on your PC and start running Windows
Windows
R
98SE, Windows
Windows
R
XP.
• If the PC has been turned on, quit all the applications
running.
2
Select USB for the source.
3
Connect the System to the PC using a USB cable (not
supplied).
(front panel)
USB cable
• Use "USB series A plug to B plug" cable when
connecting.
4
The USB drivers are installed automatically.
To play back sounds on the PC
Refer to the manuals supplied with the sound reproduction
application installed in the PC.
* Microsoft
R
, Windows
R
98, Windows
Me, Windows
R
2000 and Windows
trademarks of Microsoft corporation.
14
R
98,
R
Me, Windows
R
2000, or
PC
R
98SE, Windows
R
R
XP are registered
Playing Back from Other Equipment
To connect other equipment
By using an stereo mini plug cord (not supplied), you can
connect other equipment with analog audio output jacks,
such as an MD player, a TV, etc.
Stereo mini plug cord (not supplied)
(front panel)
If the audio output on the other equipment is not stereo
mini plug type,
Use a plug adapter to convert the stereo mini plug to the
corresponding plug of the audio output.
• Refer to the manuals supplied with the other equipment.
IMPORTANT
• Always set volume to "VOL MIN" when connecting or
disconnecting the other equipment.
To select other equipment for the source
Portable audio
device,
Game machine, etc.
Publicité
