3
Step
: Hook Up
If you need more detailed information, see page 6.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals, since the terminal names actually printed on the rear
may vary.
Turn the power off to all components before connections.
SUBWOOFER
DECODER
TV
4
AUDIO INPUT
OPTICAL
DIGITAL IN
VIDEO INPUT
VIDEO INPUT
Yellow
VIDEO INPUT
Green
Y
Blue
P
b
Red
P
r
To a wall outlet
Plug the AC power cord only after all
connections are complete.
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
Audio cord (not supplied)
Optical digital cord (not supplied)
S-VIDEO cord (not supplied)
Composite video cord (supplied)
Component video cord (not supplied)