Publicité
5.6 Repliage manuel - Manual folding - Manual folding
Les bineuses ECONET à re-
pliage manuel permettent de re-
plier 1 élément bineur à chaque
extrémité. Elles sont équipées
de ressorts afin d'aider l'opéra-
teur lors de la manipulation des
rallonges.
Une broche permet de verrouil-
ler la rallonge en position travail
ou transport.
ATTENTION : avant de manipuler les rallonges, il faut impérativement verrouiller l'élément en position
haute à l'aide du crochet de verrouillage situé au niveau de la manivelle de terrage de l'élément primeur.
WARNING: before manipulating extensions, the unit must be locked into the upper position using the loc-
king hook located on the depth control crank screw of the priming unit.
WARNING: before manipulating extensions, the unit must be locked into the upper position using the loc-
king hook located on the depth control crank screw of the priming unit.
All manuals and user guides at all-guides.com
ECONET hoeing machines with
manual folding allow 1 hoeing unit
at each end to be folded back.
They are equipped with springs in
order to assist the operator when
manipulating extensions.
A pin allows the extension to be
locked into the working or trans-
port position.
Page 19
ECONET hoeing machines with
manual folding allow 1 hoeing unit
at each end to be folded back.
They are equipped with springs in
order to assist the operator when
manipulating extensions.
A pin allows the extension to be
locked into the working or trans-
port position.
Publicité
