Kenwood HG210 Manuel D'instructions page 5

English
safety
Read these instructions carefully and retain for future
reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
The symbol marked on the product indicates a
surface that can become hot during use.
Take care when opening and closing the grill.
DO NOT touch hot surfaces. Accessible surfaces are
liable to get hot during use. Always use the handle or
wear protective gloves if necessary.
Do not operate the grill without the plates fitted.
Ensure the plates are completely dry before refitting
to the grill.
Never touch the plates with sharp or abrasive items,
as this will damage the non-stick surface.
Do not immerse the appliance, cord or plug in water
or any other liquid.
Do not leave the appliance unattended when in use.
Do not use if there is any damage to the appliance,
cord or plug. Get it checked or repaired: see 'service
and customer care'.
This appliance should only be used on a stable, flat
heat resistant surface or table. If operating on a
surface less than 85cm high take extra care especially
when using near children.
Do not let the cord hang over the edge of the
worksurface or touch hot surfaces.
Do not move the unit whilst in operation or still hot.
Always unplug the appliance when not in use and
allow it to cool completely before storing or removing
the grill plates for cleaning.
Do not use the appliance outdoors.
2