Grundig WTR 3000 BT Mode D'emploi page 6

SAFETY­AND­INFORMATION
Compliance­with­the­WEEE­Direc-
tive­and­Disposing­of­the­Waste­
Product:­
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classifica-
tion symbol for waste electrical and electronic
equipment (WEEE).
This product has been manufactured
with high quality parts and materials
which can be reused and are suitable
for recycling. Do not dispose of the
waste product with normal domestic
and other wastes at the end of its service life. Take
it to the collection center for the recycling of elec-
trical and electronic equipment. Please consult
your local authorities to learn about these collec-
tion centers.
Compliance­with­RoHS­Directive
The product you have purchased complies with
EU RoHS Directive (2011/65/EU). It does not
contain harmful and prohibited materials speci-
fied in the Directive.
POWER­SUPPLY
Mains­operation
Check that the mains voltage on the type plate
(on the back of the device) corresponds to your
local mains supply. If this is not the case, contact
your specialist dealer.
1
Plug the mains cable supplied into the »AC«
socket on the device.
2
Plug the mains cable into the socket (230 V ~ ,
50/60 Hz).
6­ ­ ENGLISH
All manuals and user guides at all-guides.com
Package­information
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by
the local authorities.
vice which could cause an electric shock.
electrical earth.
­----------------------------------------------------------------------------------------------------------------
­----------------------------------------------------------------
Packaging materials of the product are
manufactured from recyclable materi-
als in accordance with our National
Environment Regulations. Do not dis-
The lightning flash represented by the
arrow symbol in an equilateral triangle
is intended to alert users to the pres-
ence of the high voltage within the de-
This equipment is a class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
Please read the entire manual
carefully before operating this
device.
Caution:
The device is connected to the mains with
7
the power cable. Pull out the power cable
when you want to completely disconnect the
device from the mains.
Unplug the mains plug to disconnect the de-
vice from the mains. Make sure the power
plug is easily accessible during operation
and not hindered by other objects.
The mains plug or appliance coupler is used
7
as disconnect device, the disconnect device
shall remain readily operable.