Publicité
Les langues disponibles
Les langues disponibles
RADIOMODE
Generalfunctions
Switchingonandoff
1
Press »ON/OFF« to switch the device on and
off.
Adjustingthevolume
1
Rotate volume knob to adjust the volume.
Adjustingthetone
1
Open the menu with »Menu«.
2
Select the option »System
with »
« and confirm by pressing »OK/i«.
r
e
3
Select
the
option
»
« and confirm by pressing »OK/i«.
r
e
– Display e.g.: »My EQ«.
4
Select the desired option with »
firm by pressing »OK/i«.
5
Press »Menu« to end the display.
Listeningwithheadphones
1
Connect the headphones to the »PHONES«
headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
Caution:
Excessive sound pressure from the earphones
7
or headphones can cause hearing loss.
FMmode
For the best FM reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
SelectingtheinputsourceFM
1
Select the input source FM with »Mode/AL«.
– Display: the frequency of a FM radio station.
Selectingstoredstations
1
Select the station you want using the preset
buttons »1« to »5« (presets 1 to 5) or using
»5+
e
II« and the preset buttons »1« to »5«
(presets 6 to 10).
10
ENGLISH
All manuals and user guides at all-guides.com
------------------------------------------------------------------------------------------------------------------------
DisplayingRDSstationinformations
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
1
Settings«
»E Q «
with
Listeningtoanexternalsource
1
« and con-
r
e
2
3
4
5
Notes:
It may take some time before all RDS infor-
7
mation is available.
GRUNDIG has no influence on the correct-
7
ness of such information.
Press »OK/i« repeatedly.
– The following display appears in succesion:
The name of the radio station, radio text (if
offered), station type (PTY), the current time
and date.
Use a standard audio cable to connect
IN« on the back of the device to an AUDIO
OUT socket on the external equipment.
Press »ON/OFF« to switch on the device.
Select the input source for the external device
with »Model/AL«.
– Display: »AUX IN«.
Rotate volume knob to adjust the volume .
Start playback on the external device.
Note:
If no audio signal is available on socket
7
»AUXIN«, the device switches automatical-
lyto Stand-by mode after 15 minutes. Forfur-
ther use switch on the device again.
»AUX
Publicité
