Publicité
Les langues disponibles
Les langues disponibles
SETTINGS
- --------------------------------------------------------------------------------------------------------------------------------------
Tuningandstoringradiostations
(FM)–firstinstallation
When the device is switched on for the first time
or after factory reset, the Auto Tuning System will
start to.
Scan the FM waveband and store the first 10 ra-
dio stations as presets 1 to 10.
The time is updated automatically.
1
For the best FM reception, it is sufficient to
extend the telescopic antenna and direct it ac-
cordingly.
2
Press »ON/OFF« to switch on the device.
– The automatic station search starts, searches
and stores the radio stations.
– Displays
that
radio stations are stored at the presets.
TuningandstoringFMradiosta-
tions–afteraremoval
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new radio stations.
1
Press »ON/OFF« to switch on the device.
– Display: the frequency of a FM radio station.
2
Open the menu with »Menu«.
3
Select the option »ATS« with »
firm by pressing »OK/i«.
– It starts the automatic station search.
– The automatic station search starts, searches
and stores the radio stations.
8
ENGLISH
All manuals and user guides at all-guides.com
ProgrammingFMradiostations–
manually
1
2
3
4
10
FM
5
6
7
« and con-
r
e
Select the input source FM with »Mode/AL«.
Open the menu with »Menu«.
Confirm the option »Scan« by pressing
»OK/i«.
– Display: »Scan All«.
Note:
You can select whether the device will scan
7
radio stations with weak signal (display
»Stron g «) or all radio stations (display:
»All«).
Select the desired option with »
firm by pressing »OK/i«.
Press »Menu« to switching off the menu
Press and hold down »
r
desired radio station.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
press briefly »
« or »
« until you have found the
r
e
frequency you want.
– The frequency changes in steps of 50 kHz.
To store the FM radio station on a preset, press
and hold down the required preset button »1«
to »5«, until »P1« appears.
Note:
II«symbol button until »P«
Press the
»5+
e
7
appears and flash, press »1« to »5« for pre-
sets 6 to 10.
« and con-
r
e
« or »
« to search the
e
Publicité
