Jennair JBZFR24IGX Guide D'utilisation Et D'entretien page 9

7. Showroom
This mode is used when the refrigerator
is on display in a retail store or if you
want to turn the cooling off and
deactivate all other functions except
interior lighting.
To activate showroom mode, press and hold
top and bottom zone icons simultaneously
for 3 seconds.
To deactivate the showroom mode, press
and hold top and bottom zone icons
simultaneously for 3 seconds.
FREEZER CONTROLS
1. Pure Freeze
Feature
®
Pure Freeze
automatically when the freezer is at its
lowest setting. The Pure Freeze
reduces freezer burn.
Viewing and Adjusting Temperature
When you first install your freezer, make
sure that the control is still set to the
recommended temperature. The factory
recommended setting is -2°F (19°C) for the
freezer.
Touch - or + to select a temperature setting.
1. 2.
feature is activated
®
®
8. Filter Reset
indicator will turn off.
Replace Filter
After 14 days without replacing the water filter,
the "Replace Filter" icon will blink seven times and
an alert tone will sound three times at the end of
dispensing. See the "Water Filtration System" section.
NOTE: "Replace Filter" will remain illuminated if a
filter reset is not completed.
Order Filter
3.
4.
7. 8.
2. Activate Temperature Mode for Freezer
Deli Drawer
setting
3. Cooling Zones
Select features of your freezer are tied to the
perimeter lighting.
Press the zone keys to light the corresponding
zones in your freezer.
Displays the status of the water filter.
To reset the filter, press and hold
FILTER RESET for 3 seconds. After
countdown, the "Replace Filter"
Replace the water filter. While you
are dispensing water, the "Replace
Filter" icon will flash constantly from
beginning to the end of dispensing.
Order a replacement water filter.
5. 6.
Touch Assorted, Spirits, or DeepFreeze to
select a zone temperature setting.
9