Jennair JBZFR24IGX Guide D'utilisation Et D'entretien page 14

SHELVES
The shelves in your appliance are adjustable to meet your
individual storage needs.
Storing similar food items together in your appliance and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier. It will also
reduce the amount of time the refrigerator door is open
and save energy .
Important information to know about glass
shelves and covers:
Do not clean glass shelves or covers with warm
water when they are cold. Shelves and covers
may break if exposed to sudden temperature
changes or impact, such as bumping.
Tempered glass is designed to shatter into many
small, pebble-sized pieces. This is normal. Glass
shelves and covers are heavy. Use both hands
when removing them to avoid dropping.
TO REMOVE AND REPLACE THE SHELF AND SHELF
SUPPORTS:
1.
Remove the shelf by tilting it up at the front and
lifting it out of the shelf supports. Pull the shelf
straight out.
2.
To replace the shelf, reposition the shelf supports in
the desired location. Check that they are level and
firmly inserted in the support rails.
3.
Place the back of the shelf in the shelf supports.
4.
Lower the front of the shelf and make sure that it is
positioned correctly.
14
DELI/CRISPER DRAWERS
TO REMOVE AND REPLACE THE DELI/CRISPER
DRAWERS:
1.
To remove the deli/crisper drawers, press the clips
located at the bottom of the drawer.
2.
Lift up on the drawer and pull straight out.
1.
To replace the deli/crisper drawers, extend the glides
to their fullest extent.
2.
Using your fingers, hold the glides in place as you
place the drawer back on the glides.