Jennair JBZFR24IGX Guide D'utilisation Et D'entretien page 11

BEFORE USE
Before using your refrigerator, all packaging materials
should be removed and the interior should be cleaned.
Remove tape and glue residue from surfaces before
turning on the refrigerator. With your fingers, rub a
small amount of liquid dish soap over any adhesive
and wipe with warm water to remove.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove
tape or glue. These can damage the surfaces of your
refrigerator.
Dispose of and/or recycle all packaging materials.
After all packaging materials have been removed,
clean the inside of your refrigerator.
Flush 3 gallons (11.4 L) of water through the water
system to clear air from the water line and to
keep the dispenser from dripping and/or avoiding
decreased dispenser flow.
NOTE: If the filter is not installed correctly, water may
dispense at a lower flow rate and there will be slower
ice production. Improper filter installation may also
cause the water filter housing to leak.
SMART FEATURES
Smart Features help make your every day a little more
efficient by letting you remotely monitor, manage, and
maintain your refrigerator.
REMOTE TEMPERATURE CONTROL
What it does: Allows you to control the temperature of
your refrigerator remotely from your mobile device via
the JennAir App.
®
What it does for you: Lets you control temperatures in
your refrigerator, freezer, and temp-controlled pantry
remotely—not just when you are standing in front of it.
WATER FILTER STATUS
What it does: Gives you a look at the life remaining for
your air and water filters before a replacement is needed.
What it does for you: Helps you be more efficient in
planning for, ordering, and replacing filters.
AUTO REORDER
What it does: Allows you to order replacement filters,
consumables, and accessories via the JennAir
delivery directly to your home.
What it does for you: Simplifies ordering correct water
and air filters—no trips to the store and searching for the
correct filters.
OVER TEMPERATURE
What it does: Sends you a notification when the
temperature in your refrigerator reaches and rises
above a specified value in the refrigerator and freezer
compartments.
What it does for you: Alerts you to over-temperature
status to provide input regarding disposition of
refrigerator/freezer contents.
GETTING STARTED
MAX COOL—REFRIGERATOR
What it does: Allows you to control your refrigerator
remotely from your mobile device via the JennAir
What it does for you: Lets you turn on/off Max Cool
options remotely to make temperatures colder in the
refrigerator in anticipation of loading newly purchased
grocery items.
MAX ICE—FREEZER
What it does: Allows you to control your freezer remotely
from your mobile device via the JennAir
What it does for you: Makes fresh-tasting ice to
accommodate your entertainment needs - up to
4 pounds in 24 hours.
PURE FREEZE
What it does: Allows you to receive status of your
refrigerator remotely to your mobile device via the
JennAir
What it does for you: Indicates when temperatures are
adjusted down to a deep freeze level to reduce freezer
burn and helps frozen items maintain their appearance
and taste.
SABBATH MODE
What it does: Allows the door of the refrigerator or
freezer to be opened or closed during the Sabbath or
other religious holidays without activating the interior
lights or controls. Allows you to turn on and off remotely
from your mobile device via the JennAir
What it does for you: Lets you turn on/off Sabbath mode
options remotely.
DOOR OPEN ALERT
What it does: Sends you a notification when the door of
the appliance has been left open.
What it does for you: Alerts you to door ajar status so you
can close the door(s) or call home to ask someone else to
close the door before an over-temp situation arises.
POWER OUTAGE
What it does: Sends you a notification when power
to your refrigerator goes out, returns, or highest
temperature is reached.
App for
®
What it does for you: Alerts you to power status and
disposition of the appliance contents.
SMART GRID
This product has WiFi capability and requires
Internet connectivity and a wireless router to enable
interconnection with an Energy Management System,
and/or with other external devices, systems, or
applications.
MODE
®
App.
®
App.
®
App.
®
App.
®
11