Jennair JBZFR24IGX Guide D'utilisation Et D'entretien page 10

4. Max Ice
The Max Ice Setting increases the
freezer cooling capacity improving the
ice making rate.
Ice Maker Off
To turn the ice maker off, touch ICE
MAKER OFF.
5. Connect
Wi-Fi connectivity allows your Smart
Freezer to connect to the Internet and
interact with the JennAir
your smartphone or mobile device. See
the "Automatic Setup—Wi-Fi Protected Setup (WPS)"
section for more information.
Sabbath
Allows the door of the freezer to be
opened or closed during the Sabbath
or other religious holidays without
activating the interior lights or controls.
Press and hold Sabbath for 3 seconds to activate
Sabbath mode.
Lock
The dispenser can be locked for easy
cleaning or to avoid unintentional
dispensing.
6. Power Outage
The Power Outage indicator lets
you know if the power supply to the
freezer has been off and the freezer
temperature has risen.
Over temp Alarm
Helps avoid food spoilage and high
energy costs by sounding an alert
when freezer temperatures remain at
unusually high levels.
Door Open
The Door Open alarm feature sounds
an alarm when the refrigerator door(s)
or freezer door is open for 5 minutes
and cooling is turned on. The alarm will repeat every
2 minutes. Close the door to turn the alarm and "Door
Open" alert off. To stop the alarm noise with the door
open, press any key.
10
7. Showroom
lighting.
App from
®
8. Filter Reset
indicator will turn off.
Replace Filter
After 14 days without replacing the water filter,
the "Replace Filter" icon will blink seven times and
an alert tone will sound three times at the end of
dispensing. See the "Water Filtration System" section.
NOTE: "Replace Filter" will remain illuminated if a
filter reset is not completed.
Order Filter
This mode is used when the freezer is
on display in a retail store or if you want
to turn the cooling off and deactivate
all other functions except interior
To activate showroom mode, press and hold
top and bottom zone icons simultaneously for
3 seconds.
To deactivate the showroom mode, press
and hold top and bottom zone icons
simultaneously for 3 seconds.
Displays the status of the water filter.
To reset the filter, press and hold
FILTER RESET for 3 seconds. After
countdown, the "Replace Filter"
Replace the water filter. While you
are dispensing water, the "Replace
Filter" icon will flash constantly from
beginning to the end of dispensing.
Order a replacement water filter.