Télécharger Imprimer la page

Costway FP10233 Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

NOTE: Do not operate any other electrical appliances on this
circuit or you may trip the circuit breaker/fuse.
If this power supply cord is damaged, it cannot be repaired. It
must be replaced with a cord from the product manufacturer.
If the power supply cord is damaged, please contact Customer
Service.
To test the power supply cord before operation:
1. Plug the power cord into a grounded 3 prong outlet.
2. Press the Test button, and then press and release the
Reset button to restore power.
REQUIRED GROUNDING METHOD
This air conditioner must be grounded.
The air conditioner is equipped with a power supply
cord that has a 3 prong grounding plug.
The power supply cord must be plugged into a
mating, grounded 3 prong outlet, and grounded in
accordance with all local codes and ordinances.
INSTALLATION INSTRUCTIONS
STEP 1 - UNPACK AIR CONDITIONER
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
16
115V
15 Amp
WARNING
Remove packaging materials. Save the carton and the foam
packaging for storing the air conditioner when not in use.
NOTE: There are NO packing materials inside the air conditioner
to remove—Do Not open the cabinet.
Properly dispose of/recycle all packing materials.
Handle the air conditioner gently.
Keep the air conditioner upright and level. Do not set the air
conditioner on its side, front, back or upside down.
STEP 2 - TWIST THE EXHAUST HOSE CONNECTOR
ONTO EXHAUST HOSE
A. Grasp both ends of the exhaust hose and gently pull to expand
the hose.
NOTE: Do not attach additional hoses to extend the length. This
would decrease cooling efficiency and may damage the air
conditioner.
B. Using a counterclockwise motion, attach the open end of the
exhaust hose to the exhaust nozzle.
STEP 3 - CONNECT EXHAUST HOSE TO THE AIR
CONDITIONER
IMPORTANT: When connecting the hose, the air conditioner must
be close enough to the window that you will not dislodge the
window seal plate. Once the hose is connected, move the air
conditioner 20" (51 cm) from the wall.
17

Publicité

loading

Ce manuel est également adapté pour:

Fp10270