Publicité
Les langues disponibles
Les langues disponibles
A. Slide the exhaust hose assembly from the outer air outlet to
the right.
B. The assembly is completed until the convex point of the inner
joint and the concave point of the air outlet are stuck.
STEP 4 - INSTALL WINDOW PANELS
Depending on the size of your window opening, use the main
panel and one or both of the extension panels.
A. Open the window and place the main window panel into the
window.
NOTE: The window assembly is designed to accommodate either
a vertical slide or horizontal slide window.
Vertical Slide Window
18
Vertical Slide Window
B. Take out the butterfly nut from the user manual's bag, and
disassemble the screws in the following directions.
C.
Lock the butterfly nut on panel A, and do not
lock the butterfly nut tightly, keeping the spacing
of 0.01inch(2.5mm).
D.
Connect with panel B, adjust the panel(s) to the width
or height of the window as shown.
0.01inch
(2.5mm)
19
Publicité
