Publicité
- 93 -
:ST+# Increment Manual rate by 0.1 Hz
Returns: Nothing
:ST-# Decrement Manual rate by 0.1 Hz
Returns: Nothing
:STA- [Autostar II only] Enable Altitude SmartDrive (PEC)
Returns:Nothing
:STA+ [Autostar II only] Enable Altitude SmartDrive (PEC)
Returns:Nothing
:STZ- [Autostar II only] Disable RA/Azimuth SmartDrive (PEC)
Returns:Nothing
:STZ+ [Autostar II only] Enable RA/Azimuth SmartDrive (PEC)
Returns:Nothing
:SwN#
Set maximum slew rate to N degrees per second. N is the range (2..8)
Returns:
0 – Invalid
1 - Valid
:SyGPDCO#
Sets the object selection string used by the FIND/BROWSE command.
Returns:
0 – Invalid
1 - Valid
:SzDDD*MM#
Sets the target Object Azimuth [LX 16" and Autostar II only]
Returns:
0 – Invalid
1 - Valid
T – Tracking Commands
:T+# Increment Manual rate by 0.1 Hz
Returns: Nothing
:T-# Decrement Manual rate by 0.1 Hz
Returns: Nothing
:TL# Set Lunar Tracking Rage
Meade Telescope Protocol
- 17 -
Returns: Nothing
:TM# Select custom tracking rate [ no-op in Autostar II]
Returns: Nothing
:TQ# Selects sidereal tracking rate
Returns: Nothing
:TS# Select Solar tracking rate. [LS Only]
Returns: Nothing
U - Precision Toggle
:U# Toggle between low/hi precision positions
Low - RA displays and messages HH:MM.T sDD*MM
High - Dec/Az/El displays and messages HH:MM:SS sDD*MM:SS
Returns Nothing
V – PEC Readout
:VDNNNN#
Read out Dec PEC Table Entry [Autostar II and Classic 16" only]
Returns: D.DDDD
Rate Adjustment factor for worm segment NNNN. PecRate = TheoreticalRate * sD.DDD for this segment
:VRNNNN#
Read out RA PEC Table Entry [Autostar II and Classic 16" only]
Returns: D.DDDD
Rate Adjustment factor for worm segment NNNN. PecRate = TheoreticalRate * sD.DDD for this segment
W – Site Select
:W<n>#
Set current site to <n>, an ASCII digit in the range 1..4
Returns: Nothing
? – Help Text Retrieval
Publicité
