Publicité
- 92 -
:SO<string>#
Set site 3's name to be <string>. LX200s only accept 3 character strings. Other scopes accept up to 15 characters.
Returns:
0 – Invalid
1 - Valid
:SoDD*#
Set lowest elevation to which the telescope will slew
Returns:
0 – Invalid
1 - Valid
:SP<string>#
Set site 4's name to be <string>. LX200s only accept 3 character strings. Other scopes accept up to 15 characters.
Returns:
0 – Invalid
1 - Valid
:SpB<num> <num>#
Set backlash values [Autostar and Autostar II]
Returns: 1 when complete
0 for programming error
: SpH<num><num>#
Set Home Data [Autostar II only]
Returns: 1 when complete
0 for programming error
:SpS<num><num><num>#
Set Sensor Offsets [Autostar II only]
Returns: 1 when complete
0 for programming error
:Sq#
Step the quality of limit used in FIND/BROWSE through its cycle of VP ... SU. Current setting can be queried with
:Gq#
Returns: Nothing
:SrHH:MM.T#
:SrHH:MM:SS#
Set target object RA to HH:MM.T or HH:MM:SS depending on the current precision setting.
Returns:
0 – Invalid
1 - Valid
:SsNNN#
Set the size of the largest object the FIND/BROWSE command will return to NNNN arc minutes
Returns:
0 – Invalid
1 - Valid
:SSHH:MM:SS#
Sets the local sidereal time to HH:MM:SS
Returns:
0 – Invalid
1 - Valid
Meade Telescope Protocol
- 16 -
:StsDD*MM#
Sets the current site latitude to sDD*MM#
Returns:
0 – Invalid
1 - Valid
:STdddd.ddddddd# [Autostar II Only]
Sets the current tracking rate to ddd.dddd hertz, assuming a model where a 60.0000 Hertz synchronous motor will
cause
the RA axis to make exactly one revolution in 24 hours.
Returns:
0 – Invalid
2 – Valid
Publicité
