Télécharger Imprimer la page

Meade Instruments 7 LX200 Serie Mode D'emploi page 85

Publicité

- 85 -
:Gg# Get Current Site Longitude
Returns: sDDD*MM#
The current site Longitude. East Longitudes are expressed as negative
:GH# Get Daylight Savings Time Setting [Autostar II only]
Returns:
1# if daylight savings is enabled.
0# if daylight savings time is disabled.
:Gh# Get High Limit
Returns: sDD*
The highest mount relative altitude (to keep cameras etc. from crashing into forks or tripods) that the telescope
will be allowed to slew to without a warning message.
:GL# Get Local Time in 24 hour format
Returns: HH:MM:SS#
The Local Time in 24-hour Format
:Gm# Get distance to Meridian [Max Only]
Returns: sDD*MM'SS# or sDD*MM depending on precision setting.
A '#' terminated string is the RA angle to the Meridian (LST-RA). If the scope is on a German mount, a negative
sign indicates the scope has moved to the offside of the mount where interference is possible. On fork mounts, the
value is always positive.
:Gl# Get Larger Size Limit
Returns: NNN'#
The size of the smallest object to be returned by a search of the telescope using the BROWSE/FIND commands.
:Gm# Get distance to Meridian [Max Only]
Returns: sDD*MM'SS# or sDD*MM # depending on the current precision setting.
A '#' terminated string is the RA distance to the Meridian (LST-RA). If the scope is on a German mount, a
negative sign indicates the scope has moved to the offside of the mount where interference is possible. On fork
mounts, the value is always positive.
:GM# Get Site 1 Name
Returns: <string>#
A '#' terminated string with the name of the requested site.
:GN# Get Site 2 Name
Returns: <string>#
A '#' terminated string with the name of the requested site.
:GO# Get Site 3 Name
Returns: <string>#
A '#' terminated string with the name of the requested site.
:GP# Get Site 4 Name
Returns: <string>#
Meade Telescope Protocol
- 7 -
A '#' terminated string with the name of the requested site.
:GpB# Get backlash values [Autostar and Autostar II]
Returns: <num> <space><num>#
: GpH# Get Home Data [Autostar II only]
Returns: <num><num>#
The scope's home position
:GpS# Get Sensor Offsets [Autostar II only]
Returns: <num><num><num>#
These are the azerror,elerror and home position offset
:Go# Get Lower Limit
Returns: DD*#
The minimum elevation of an object above the horizon to which the telescope will slew with reporting a
"Below Horizon" error.
:Gq# Get Minimum Quality For Find Operation
Returns:
SU# Super
EX# Excellent
VG# Very Good
GD# Good
FR# Fair
PR# Poor

Publicité

loading

Ce manuel est également adapté pour:

8 lx200 serie10 lx200 serie13 lx200 serie