Publicité
- 91 -
:SesDDD*MM#
Sets the target object to the specified selenogrphic longitude on the Moon
Returns 1 – If the Moon is up and coordinates are accepted.
0 – If the coordinates are invalid for any reason.
:SfsMM.M#
Set faint magnitude limit to sMM.M
Meade Telescope Protocol
- 14 -
Returns:
0 – Invalid
1 - Valid
:SFNNN#
Set FIELD/IDENTIFY field diameter to NNN arc minutes.
Returns:
0 – Invalid
1 - Valid
:SgDDD*MM#
Set current site's longitude to DDD*MM an ASCII position string
Returns:
0 – Invalid
1 - Valid
:SGsHH.H#
Set the number of hours added to local time to yield UTC
Returns:
0 – Invalid
1 - Valid
:SHD#
Set daylight savings time parameter. [Autostar II only]. Where D = 1 enables daylight savings and D = 0 disables
daylight
savings.
:ShDD#
Set the maximum object elevation limit to DD#
Returns:
0 – Invalid
1 - Valid
:SlNNN#
Set the size of the smallest object returned by FIND/BROWSE to NNNN arc minutes
Returns:
0 – Invalid
1 - Valid
:SLHH:MM:SS#
Set the local Time
Returns:
0 – Invalid
1 - Valid
:Sm+# Enable smart mount flexure correction [Autostar II only]
Returns: nothing
:Sm-# Disable smart mount flexure correction [Autostar II only]
Returns: nothing
:SM<string>#
Set site 1's name to be <string>. LX200s only accept 3 character strings. Other scopes accept up to 15 characters.
Returns:
0 – Invalid
1 - Valid
:SN<string>#
Set site 2's name to be <string>. LX200s only accept 3 character strings. Other scopes accept up to 15 characters.
Returns:
Meade Telescope Protocol
- 15 -
0 – Invalid
1 - Valid
Publicité
