Whirlpool SPIW309A3WF.1 Consignes D'utilisation page 4

• When mo
for discon
• The appl
SAFETY INSTRUCTIONS
ELECTRICAL WARNINGS
Н The power supply must be of rated voltage with special circuitry for the appliance.
The diameter of the power cord must comply with requirements.
Н A multi-pole switch shall be installed in the Čxed wiring in accordance with the wirin
rules and the appliance must be earthed in conformity with national electrical safety
standards.
Н An all-pole disconnection switch having a contact separation of at least 3 mm in all pole
should be connected in Čxed wiring.
Н
Do not use extension leads, multiple sockets or adapters. The electrical components
must not be accessible to the user after installation. Do not use the appliance when you ar
wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if i
is not working properly, or if it has been damaged or dropped.
Н If the supply cord is damaged, it must be replaced with an identical one by the
manufacturer, its service agent or similarly qualiČed persons in order to avoid a hazard - ri
of electrical shock.
Н A residual current device (RCD) having rated residual operation current not exceeding
30 mA shall be incorporated in Čxed wiring according to national law.
Н The temperature of refrigerant circuit will be high, please keep the interconnection cab
away from the copper tube.
Н Ensure safe grounding and a grounding wire connected with the special grounding
system of the building, installed by professionals. The appliance must be Čtted with
electrical leakage protection switch and an auxiliary circuit breaker with suΚcient capacity
The circuit breaker must also have a magnetic and a thermal tripping function to ensure
protection in case of short-circuit and overload.
Model
Required capacity of circuit breaker 16A
Н For the connection of power cord and cable connection between indoor and outdoo
units, please see the wiring diagram on the appliance.
CLEANING AND MAINTENANCE
Н WARNING: Ensure that the appliance is switched oΑ and disconnected from the
power supply before performing any maintenance operation; never use steam cleaning
equipment - risk of electric shock.
Н Maintenance and repair requiring the assistance of other skilled personnel shall be
carried out under the supervision of the person competent in the use of Рammable
refrigerants.
Н Servicing shall only be performed with equipment as recommended by the
manufacturer.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100– recyclable and is marked with the recycle symbol ( ). The various parts of the
packaging must therefore be disposed of responsibly and in full compliance with local authority regulations
governing waste disposal.
All manuals and user guides at all-guides.com
9K ť 12K
- 5 -
18K
20A
24K
25A