Antari ICE-101 Mode D'emploi page 8

down for a short period in order to heat back up. During this time no fog can be produced.
The green "READY" L.E.D. on the remote will be off during this time and will light up again
when the machine is ready.
DMX Connector Pin Assignment
The machine provides a 3 pin XLR connector for DMX connection. Diagram below indicates
pin assignment information
Specification
- Input voltage
- Rated power
- Warm-up time
- Fluid consumption
- Fluid tank capacity
- Compatible fluid
- Ambient temp. range
- Output
- Control
- DMX channels
- Connection
- Dimension
- Weight
Save these instructions
Pin
1
2
3
US model : AC 100-120V, 50 / 60Hz 9.5A
EU model : AC 220-240V, 50 / 60Hz 5A
1130W
4.5 minutes (approx.)
25ml/min
2.5l (0.66gal)
Antari FLL Low Fog Effects Fluid
Antari FLC Super Light Fog Fluid
Antari FLR Light Fog Fluid
0 °C - 40 °C (32 °F-104 °F)
43 m
Manual, Timer, DMX 512
1 channel
IEC (Power)
XLR 3-pin (DMX)
L660 W355 H443 mm
(L25.98 W13.98 H17.44 inch)
24.4 kg (53.79 lbs)
Function
Ground
Data-
Data+
2
/min
8