Kessel Aqualift Comfort 400V Mono Instructions De Pose Et D'utilisation page 45

2.2 Intended use
The control unit represents the control of a lifting station or
a pumping station for wastewater. Probes, float switches or
pressure sensors can be used to detect the level. When the
switching level has been reached, the pump-off function is
activated. When the level has fallen accordingly, pumping off
is ended automatically.
For certain pumps, it may be necessary to set the motor pro-
tection switch (see "Technical data", page 39)
WARNING
The control unit itself is NOT intended for installation
in an EX zone!
All:
modifications or attachments
use of non-genuine spare parts
repairs carried out by companies or persons not autho-
rised by the manufacturer
not explicitly authorised by the manufacturer in writing can
lead to a loss of warranty.
010-532_06
All manuals and user guides at all-guides.com
(1)
(2)
(3)
(4)
(5)
Installation and operating manual
Main switch
Display and control panel
Type plate
Cable passages, connections
Screws for housing cover
37 / 204