Amana ZRT6510 Serie Mode D'emploi page 15

Prepare for Self-clean and
Delayed Self-clean Cycle
!
WARNING
To avoid risk of personal injury, do not touch oven
vents or areas around vents during self-cleaning.
These areas can become hot enough to cause burns.
To avoid risk of smoke damage or fire, clean excess
spills from oven interior.
!
CAUTION
To avoid fire or smoke damage, remove any flammable
materials from storage drawer. Items like plastic
containers and paper manuals can melt or burn.
• A small amount of smoke is normal when cleaning.
Excess smoke may indicate a faulty gasket or too
much food residue has been left in oven. Move birds
and small animals susceptible to fumes or smoke to
another room.
• Oven should be cleaned before it gets too dirty. Wipe
up large spills before self-cleaning.
• Do not use cleaning cycle if oven light cover is not
properly in place.
• Remove oven racks and all cooking utensils from oven.
• Clean excess spills from oven interior.
• Remove items from range top and backguard. These
areas can become hot during self-cleaning cycle.
Self-cleaning
Self-clean feature uses high oven temperature to clean
oven interior.
1. Prepare oven for self-cleaning.
2. Press CLEAN pad.
3. Press or pad to adjust cleaning time.
• "3:00" displays when
• Increase or decrease cleaning time by 5 minute
increments.
• Clean can be set from 2 to 4 hours. Minimum
recommended cleaning time is 3 hours.
• Oven begins to clean at calculated time. "LOCK"
flashes in display when automatic door latch is
locking.
4. Press OVEN CANCEL pad when finished.
• When oven has cooled to a safe temperature, door
latch opens and "LOCK" light flashes while opening.
When oven has cooled enough to open door
"LOCK" light no longer displays and door can be
opened.
All manuals and user guides at all-guides.com
or is pressed.
Interrupt Self-Clean Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, door
will unlock and can be opened.
Delayed Self-clean Cycle
Self-clean feature uses high oven temperature to clean
oven interior. Set oven to begin and end cleaning at later
time using. Range control calculates back from end time
to determine starting time.
1. Prepare oven for self-cleaning.
2. Press CLEAN pad.
3. Press or pad until desired amount of cleaning
time is displayed.
• "3:00" displays when
• Increase or decrease cleaning time in 5 minute
increments.
• Clean can be set from 2 to 4 hours. Minimum
recommended cleaning time is 3 hours.
4. Press STOP TIME pad.
5. Press or pad until desired stopping time
appears in display.
• Starting time is automatically calculated based on
amount of cleaning time and stop time.
• "LOCK" flashes in display when automatic door
latch is locking.
• To view remaining cleaning time, press and hold
CLEAN pad.
• To view calculated stop time, press and hold STOP
TIME pad.
6. Press OVEN CANCEL pad when finished.
• When oven has cooled to a safe temperature, door
latch opens and "LOCK" light flashes. When oven
has cooled enough to open door "LOCK" light no
longer displays and door can be opened.
Interrupt Self-Clean Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, door
will unlock and can be opened.
15
or is pressed.