Télécharger Imprimer la page

Scheppach HCP3000 Traduction Des Instructions D'origine page 26

Nettoyeur haute pression thermique

Publicité

Les langues disponibles

Les langues disponibles

2. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope that your new device brings you much en-
joyment and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling
• Failure to comply with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Improper use.
Note:
Read the whole text of the operating manual before
assembly and commissioning.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must
be read and carefully observed by all operating per-
sonnel before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
26 | GB
3. Device description (Fig. 1-14)
1. Bow-type handle
2. High-pressure hose
3. Nozzles (red, green, white, black)
4. Transport bracket
5. Fixing plug
5.1 Sleeve
6. Star grip screws
6.1 Star grip screw screws
7. Tubular frame
8. Tank cover, incl. filter insert
9. Fuel tank
10. Carburettor
11. On/off switch
12. Oil inlet/dipstick
12.1
Oil dipstick
13. Wheel
14. Rubber foot
15. Cleaning agent tank
16. Filler cap for cleaning agent tank
17. Spraying lance
18. Pull cable starter
19. Fuel valve
20. Choke lever
21. Air filter
22. Silencer
23. Hand spray gun
24. Trigger lock
25. Trigger
26. Spray gun holder
27. Hose holder
28. Water outlet
29. Water inlet
30. High-pressure pump
31. Spark plug/Spark plug connector
32. Axle
33. Spring split pin
34. Nozzle cleaning needle
35. Spark plug wrench
36. Filling hose with funnel
37. Quick connector
38. Hose connection adapter
39. Oil drain screw
40. Inlet screen
41. Petrol drain plug
4. Scope of delivery
• Wheels (13)
• Axle (32)
• Spring split pin (33)
• High-pressure hose (2)
• Hand spray gun (23)
• Spraying lance (17)
• High pressure nozzles (red, green, white) (3)
• Low pressure nozzle / cleaning nozzle (black) (3)
• Transport bracket (4)
www.scheppach.com

Publicité

loading