Publicité
Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the
power
button.
2. Install the
left
speaker.
3. Install the
right
speaker.
4. Install the
system
board.
5. Install the battery.
6. Install the
heat
sink.
7. Install the
display
assembly.
8. Install the
left
fan.
9. Install the
right
fan.
10. Install the
WWAN card
11. Install the
solid-state
12. Install the
base
cover.
13. Install the
SIM card tray
14. Follow the procedure in
Outils recommandés
Les procédures dans ce document peuvent nécessiter les outils suivants :
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
54
Retrait et installation de composants
if applicable.
drive.
if applicable.
After working inside your
computer.
Publicité
