Publicité
Steps
1. Connect the battery cable to the connector on the system board.
2. Align and place the base cover on the palm-rest assembly, and snap the base cover into place.
3. Tighten the six captive screws to secure the base cover to the system.
Next steps
1. Install the
SIM card
tray.
2. Follow the procedure in
Disque SSD
Removing the solid-state drive
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
16
Retrait et installation de composants
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Publicité
