Publicité
Steps
1. Loosen the six captive screws that secure the base cover to the system.
2. Using a plastic scribe, pry open the base cover starting from the recesses that are located in the U-shaped indents near the
hinges at the top edge of the base cover.
NOTE:
Do not lift the base cover from the top side immediately after prying it from the recesses, as this will cause
damage to the base cover. Continue with the following steps to loosen all the hooks that secure the base cover to the
system before removing the base cover.
3. Pry open the base cover from the top, left, and right sides of the base cover.
14
Retrait et installation de composants
Publicité
