Publicité
2. Install the battery.
3. Install the
heat
sink.
4. Install the
display
assembly.
5. Install the
left
fan.
6. Install the
right
fan.
7. Install the
WWAN card
8. Install the
solid-state
9. Install the
base
cover.
10. Install the
SIM card tray
11. Follow the procedure in
Assemblage du repose-poignets et du clavier
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
SIM card tray
3. Remove the
base
cover.
4. Remove the
solid-state
5. Remove the
WWAN card
6. Remove the
right
fan.
7. Remove the
left
fan.
8. Remove the
display
assembly.
9. Remove the
heat
sink.
10. Remove the battery.
11. Remove the
system
board.
12. Remove the
right
speaker.
13. Remove the
left
speaker.
14. Remove the
power
button.
About this task
The following images indicate the location of the palm-rest and keyboard assembly and provide a visual representation of the
removal procedure.
52
Retrait et installation de composants
if applicable.
drive.
if applicable.
After working inside your
Before working inside your
if applicable.
drive.
if applicable.
computer.
computer.
Before working inside your
Publicité
