Suzuki 57100-27810-000 Instructions D'installation page 9

3. Wipe off the rest of adhesive
from the handlebar with a
degreasing agent and a waste
cloth.
Dry the handlebar completely.
4. Apply grip cement evenly and
rather abundantly to the inside
of the Grip Heater (L) ⑥ .
[Recommended: THREE BOND
1530P]
5. Apply grip cement to the han-
dlebar surface.
[Recommended: THREE BOND
1530P]
In case that bond is attached
to the end surface of the
handlebar, wipe off it with a
waste cloth completely be-
fore drying.
Waste cloth
Grip cement
GENUINE SUZUKI ACCESSORIES
Handlebar
Degreasing
agent
Grip cement
⑥
Handlebar
9 /20