Suzuki 57100-27810-000 Instructions D'installation page 12

12/20
Cut out the rear handle cover
1. Cut out the shaded area of the
rear handle cover as shown.
Remove burr from the cut-
out area.
Connection of the Grip Heater
Lead Wire
1. Route the Grip Heater Lead
Wire ① as shown and connect
it to the motorcycle coupler.
2. Insert the clamp of the Grip
Heater Lead Wire ① in the left
rear hole of the bracket in front
of the handlebar.
GENUINE SUZUKI ACCESSORIES
Rear handle cover
Right side
6mm
10mm
Motorcycle harness
18mm
Grip heater
lead wire ①
Clamp