Suzuki 57100-27810-000 Instructions D'installation page 13

3. Reinstall the rear handle cover
to the handlebar.
4. Fit the Cushion ④ to the Grip
Heater (R) ⑤ lead wire and
install the Cushion ④ to the
cutout area of the rear handle
cover, which was cut in step 1 in
P12.
5. Adjust the length of the Grip
Heater (R) ⑤ lead wire so that
white tape on it is located in the
point of 25 - 35mm from the
handle cover as shown.
Reinstall the handle cover
so that it isn't in contact with
the Grip Heater (R) ⑤ lead
wire.
Right side
Grip heater (R) ⑤
lead wire
Right side
Grip heater
cushion
Grip heater (R) ⑤
lead wire
Handle switch (R)
lead wire
GENUINE SUZUKI ACCESSORIES
13 /20
Rear handle
④
cover
Grip heater (R) ⑤
lead wire
White tape
25mm 〜 35mm
White tape