Publicité
Les langues disponibles
Les langues disponibles
10/20
6. Insert the Grip Heater (L) ⑥
into the handlebar at a stroke
with turning before the grip ce-
ment drying.
And install the Grip Heater (L)
⑥ as shown.
・ When the grip is inserted, do not stop in midway but insert it
at a stroke.
・ When inserting it, do not hit the grip end with a hammer or
twist it forcibly, the grip heater may be cut off.
・ When the grip cannot be inserted in midway, pull out the grip
by pouring the degreasing agent into a gap between the grip
heater and the handlebar. At this time, do not twist forcibly the
heater wire with a screwdriver or such similar tool, the heater
wire inside the grip heater may be cut off.
GENUINE SUZUKI ACCESSORIES
⑥
⑥
Front
60°
Handlebar
Publicité
