Suzuki 57100-27810-000 Instructions D'installation page 5

2. Slide the boot, loosen the
lock nut of the throttle cable
adjuster, tighten the adjuster
fully and loosen the throttle
cable.
3. Remove the screws of the
throttle case and remove
the upper throttle case (E).
First, remove the throttle
cable No.2, next, remove
the throttle cable No.1, then
remove the throttle grip (F).
Throttle grip will not be re-
used.
Don't remove the throttle
cable No.1 and No.2. with a
pliers or other tools forcibly.
I t m a y c a u s e i m p r o p e r
operation of the throttle.
Boot
Throttle cable No.1
(E)
Screw
GENUINE SUZUKI ACCESSORIES
5 /20
Adjuster
Lock-nut
Throttle cable No.2
Throttle grip