other device
To interrupt the search, select Stop.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. The same passcode must be entered in
both devices.
When the connection is established,
displayed.
Tip: When searching for devices, some devices may show
only the unique address (device address). To find the
unique address of your device, enter *#2820#.
Pair devices
Select
Menu
Settings
>
To pair with compatible devices and view your paired
devices, open the
Before pairing, create your own passcode (1 to 16 digits)
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
1
To pair with a device, select
device. Devices that are within range are displayed.
2
Select the device, and enter the passcode. The same
passcode must be entered on the other device as well.
3
Some audio accessories connect automatically to your
device after pairing. Otherwise, to connect to an
76
Sending data
and
Connectivity
Paired devices
tab.
Options
>
accessory, select
device.
Paired devices are indicated by
To set a device as authorised or unauthorised, select from
the following:
Set as authorized — Connections between your device
and the authorized device can be made without your
is
knowledge. You will not be asked for authorization or
acceptance separately. Use this status only for your own
devices, such as your compatible headset or PC, or devices
that belong to someone you trust.
devices in the paired devices view.
Set as unauthorized — Connection requests from this
device must be accepted separately every time.
> Bluetooth.
To cancel a pairing with a device, select
Delete.
To cancel all pairings, select
Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
New paired
placed in the Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
Block devices
Select
Menu
Options
Connect to audio
>
in the device search.
indicates authorized
Options
>
is displayed and the item is
Settings
and
Connectivity
>
Options
>
Delete
all.
.
> Bluetooth.