2
Insert a compatible memory card in the slot. Ensure
that the contact area on the card is facing down and
towards the slot.
3
Push the card in. You can hear a click when the card
locks into place.
4
Replace the back cover. Keep the device facing down
when replacing the cover. Ensure that the cover is
properly closed.
Remove the memory card
Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
18
1
Before you remove the card, press the power key, and
select
Remove memory
closed.
2
When
Removing memory card will close all open
applications. Remove anyway?
Yes.
3
When
Remove memory card and press 'OK'
displayed, remove the back cover of the device.
4
Press the memory card to release it from the slot.
5
Pull out the memory card. If the device is switched on,
select OK.
6
Replace the back cover. Ensure that the cover is
properly closed.
Antenna locations
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
card. All applications are
is displayed, select
is