Nokia N97 mini Mode D'emploi page 70

using this IAP, select the connection and
browsing.
If you select a secured WLAN, you are asked to enter the
relevant password. To connect to a hidden network, you
must enter the correct network name (service set
identifier, SSID).
If you already have the web browser running using the
currently active Wi-Fi/ WLAN connection, to return to the
web browser, select
To end the active connection, select the connection and
Disconnect Wi-Fi.
WLAN internet access points
Select Menu Settings
>
LAN > Options.
Select from the following:
Filter Wi-Fi networks — Filter out wireless LANs (WLANs)
from the list of found networks. The selected networks are
not displayed the next time the application searches for
WLANs.
Details — View the details of a network shown in the list.
If you select an active connection, the connection details
are displayed.
Operating modes
There are two operating modes in Wi-Fi WLAN:
infrastructure and ad hoc.
70
Start web
Continue web browsing.
and Connectivity
>
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a Wi-Fi/WLAN access point device, or
wireless devices are connected to a wired LAN through a
Wi-Fi/WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Wireless LAN settings
Select Menu
LAN Options
>
Select from the following:
Show Wi-Fi availability — Select whether
when a wireless LAN (WLAN) is available.
Wireless
Tip: To access the WLAN Wizard application and view the
available options, select the WLAN icon, and in the pop-up
window, select the highlighted text next to the WLAN icon.
Scan for networks — If you set
availability
searches for available WLANs and updates the indicator.
Internet connectivity test — Select whether you want
the device to test the internet capability of the selected
WLAN automatically, to ask for permission every time, or
to never perform the connectivity test. If you select
automatically
device asks for it, and the connectivity test is performed
successfully, the access point is saved to the internet
destinations.
Settings and Connectivity
>
> Settings.
Show Wi-Fi
to Yes, you can select how often the device
or allow the test to be performed when the
Wireless
>
is displayed
Run