Nokia N97 mini Mode D'emploi page 147

Q: Why can't I end a Bluetooth connection?
A: If another device is connected to your device, you can
close the connection from the other device or deactivate
Bluetooth connectivity in your device. Select
Settings and Connectivity
Off.
Q: Why can't I see a wireless LAN (WLAN) access point
even though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use a
hidden SSID if you know the correct SSID and have created
a WLAN access point for the network on your Nokia device
Q: How do I turn the wireless LAN (WLAN) off on my
Nokia device?
A: The WLAN on your Nokia device is deactivated when you
are not connected or trying to connect to another access
point, or not scanning for available networks. To further
reduce battery consumption, you can specify that your
Nokia device does not scan, or scans less often, for
available networks in the background. The WLAN is
deactivated in between background scans.
To change the background scan settings, do the following:
1 Select Menu Settings
>
Wireless LAN.
Menu
>
Bluetooth Bluetooth
> >
and Connectivity
>
2 To increase the background scan time interval, adjust
the time in Scan for networks. To stop background
scans, select Show Wi-Fi availability
3 To save your changes, select Back.
When Show Wi-Fi availability
>
WLAN availability icon is not displayed in the home
screen. However, you can still manually scan for
available WLAN networks, and connect to WLAN
networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If
to perform operation. Delete some data first.
Memory low. Delete some data from phone memory.
is displayed when you are deleting several items at the
same time, delete items one by one, beginning with the
smallest items.
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number,
address, or e-mail address. Select
the relevant contact, and edit the contact card.
Q: How can I end the data connection when the device
starts a data connection again and again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message center. To stop the
device from making a data connection, select
> Never.
is set to Never, the
Not enough memory
or
Menu Contacts and
>
Menu
>
147