All manuals and user guides at all-guides.com
SONOFF TECHNOLOGIES CO., LTD.
Factory Reset
Long press the pairing button for about 5s until the
Wi-Fi LED indicator changes in a cycle of two short and
one long ash and release, then the reset is successful.
The device enters quick pairing mode (Touch).
Please reset the switch to factory defaults if you want to
use other Wi-Fi networks, then reconnect the network.
RF Remote Controller Pairing
The BASICRFR3 supports the remote controller with
433.92MHz frequency brand to turn on/off, and each
channel can learn it independently, which is local short
-range wireless control not Wi-Fi control.
Pairing Method:
Long press the pairing button on the switch until the red
remote-controlled LED indicator ashes once, then
press the remote control button you want to pair for
successful learning.
Clearing Method:
Long press the pairing button on the switch until the red
remote-controlled LED indicator ashes twice, then
press the learned button corresponding to the remote
controller to clear code values of all learned buttons.
7
English