Arregui Print Mode D'emploi page 9

CAUTION!
Do not store the emergency keys in the safe.
8. USING THE EXTERNAL BATTERY FEED
To carry out an opening with the external feed, proceed in the
following manner:
• Place 4 x 1,5V (AA) batteries in the external feed.
• Insert the feed connector in the current outlet located
on the lower left of the keypad. The box will emit a long
beep, indicating that it has a feed connection. Do not
remove the feeder until the opening procedure has been
completed.
9. INSTALLING THE SAFE
To reduce the risk of theft from the safe, it can be secured to
the floor, to a wall or inside a cupboard. For your convenience,
there are holes on the back and in the bottom, so it can be
fixed using anchor bolts.
Caution: the safe should be installed in a horizontal
position.
10. MAINTENANCE
• Check the condition of the battery compartment on a
regular basis (every 6 months) to identify any possible
signs of rust, sulphation, etc.
• Grease/oil any mechanical moving parts, such as locks
and bolts.
• Clean the fingerprint reader with a cloth dampened with a
little alcohol.
All manuals and user guides at all-guides.com
The safe is guaranteed for a period of 24 months from the date of
its purchase, as established by the Law 23/2003 dated July 10th on
Guarantees in the Sale of Consumer Goods.
ABSS accepts the responsibility for lacks of approval declared within
a period of two years in the event of any manufacturing fault which
affects the functioning of the safe from the date of its delivery,
according to the law. As from the first 12 months, the buyer must prove
that the non-conformity already existed at the moment he received the
safe.
The faults produced as a result of an improper use or installation, an
excess of humidity or salinity, water or cement filtrations, force, the
handling of the devices by non-authorized persons, disasters, impacts
and falls are excluded from the guarantee.
The repair or substitution of any part due to a fault implies a 6-month
extension to the guarantee of the part repaired or substituted. ABSS
will accept the responsibility for the non-conformities that caused this
repair when the same factory faults that caused the first repair are
repeated.
IMPORTANT:
• These details must be completed as clearly as possible and without
• The certificate remains in the possession of the purchaser.
• The purchaser must keep the RECEIPT for the purchase of the safe,
GUARANTEE CERTIFICATE
IDENTITY DETAILS
Name of the supplier ....................................................
Date of sale .... ............................................................
Name of purchaser ......................................................
Address of purchaser ...................................................
IDENTIFYING DETAILS OF THE SALE
Model...........................................................................
Series number .............................................................
delay by the supplier, who will stamp and sign on behalf of his com-
pany in the place indicated.
together with the GUARANTEE CERTIFICATE to be able to accredit
the date of purchase. Both documents are necessary to use the
guarantee.
SUPPLIER'S STAMP
En