Publicité
Les langues disponibles
Les langues disponibles
o
Gently pull the upper thread to bring the
bobbin thread up through the needle plate.
→ A loop of the bobbin thread comes out through the
hole in the needle plate.
p
Insert tweezers through bobbin thread loop
and pull bobbin thread above the needle
plate.
q
Align the upper thread and bobbin thread,
and then pull out about 10 cm (approx.
4 inches) of the threads and pass them under
the presser foot toward the rear of the
machine.
r
Install the bobbin cover.
a
Bobbin cover
→ This completes the upper and lower threading.
24
All manuals and user guides at all-guides.com
Publicité
