Baby Lock Ellegante 3 Mode D'emploi page 12

h
Press to select the appliqué setting.
Memo
• To cancel the setting, press
• If no pattern is selected, the key appears gray and
cannot be selected.
→ The steps for creating the appliqué piece are added
to the sewing order.
Memo
• Three steps are added to the sewing order: appliqué
cutting line, position of pattern placement on the
garment, and appliqué stitching.
a
Cutting line for appliqué
b
Position of pattern placement on garment
c
Appliqué stitching
10
All manuals and user guides at all-guides.com
.
Note
• An appliqué piece cannot be created if the pattern is
too large or too complicated or a combined pattern
is separated. Even if the selected pattern fits within
the embroidering area, the entire appliqué pattern
may exceed the embroidering area when the outline
is added. If an error message appears, select a
different pattern or edit it.
i
Press .
j
Fuse or stick a piece of stabilizer to the back
of the felt or denim fabric to be used as the
appliqué piece.
Note
• For best results, be sure to use stabilizer material for
embroidering.
k
Hoop the appliqué fabric in the embroidery
frame, attach the embroidery frame to the
machine, and then start embroidering.
l
After the pattern is embroidered, thread the
machine with the thread for the cutting line,
and then sew the cutting line (APPLIQUE
MATERIAL).
a
Cutting line for appliqué
Memo
• We recommend using thread for the cutting line that
is closest to the color of the fabric.