Publicité
Les langues disponibles
Les langues disponibles
T
roubleshooting
This section is designed to help you save the cost of a service call. It outlines possible
problems, their causes, and actions you can take to solve each problem. If you still need
assistance or service, call our Consumer Assistance Center (in the U.S.A., see page 50; in
Canada, see page 51) for help or calling for service. Please provide a detailed description of
the problem, your appliance's complete model and serial numbers, and the purchase or
installation date. (See the "A Note to You" section.) This information will help us respond
properly to your request.
PROBLEM
POSSIBLE CAUSE
Nothing will
The unit is not wired into
operate
a live circuit with proper
voltage.
A household fuse has blown
or a circuit breaker has
tripped.
The oven will
You have not set the elec-
not operate
tronic control correctly.
You have programmed a
delayed start time.
The cooling fan
It is normal for the fan to run
operates during
while the oven is in use. This
BAKE, BROIL,
cools the electronic control.
or CLEAN
The surface
A household fuse has blown
units will not
or a circuit breaker has
operate
tripped.
You have not set the control
knobs correctly.
You are not pushing in
The control
before turning.
knob(s) will
not turn
You have programmed a
The Self-Clean-
delayed start time.
ing cycle will
not operate
All manuals and user guides at all-guides.com
WHAT TO DO
Wire the unit into a live circuit with
proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
Refer to the section in this manual
describing the function you are
operating.
Wait for the start time to be reached
or cancel and reset the controls.
No action is required.
Replace household fuse or reset
circuit breaker.
Push control knobs in before turning
to a setting.
Push control knob(s) in before
turning to a setting.
Wait for the start time to be reached
or cancel and reset the controls.
continued on next page
47
Publicité
