Publicité
All manuals and user guides at all-guides.com
HMEC300US.book Se ite 23 Mittwoch, 7. April 2004 3:24 15
Using the headsets
Turning NoiseGard™ on/off
With the NoiseGard™ active noise compensation turned off, the headset can be used as
a conventional headset.
Turn on the NoiseGard™ active noise compensation by setting the ON/OFF switch to
"ON". When using the BP-03 battery pack, set the NoiseGard™ ON/OFF switch to "ON"
and use the ON/OFF switch on the battery pack.
Mono/Stereo selection (except HMEC 305, HMEC 305-C, HMEC 322 and HMDC 322)
In general, you'll receive a mono sound source so that the Mono/Stereo switch can
remain set to "Mono". When using a stereo intercom system, set the Mono/Stereo
switch to "Stereo".
Adjusting the volume
Exposure to loud sounds can cause hearing damage!
Set the volume control to a medium value. Make sure that you can hear critical sounds
such as warning alarms.
Publicité
