The Input Info Menu; Input Signal - Sony VPL-S500U Mode D'emploi

The INPUT INFO Menu

The INPUT INFO menu displays the information on a
current input signal.
f H : 3 7 . 9 k H z
INPUT
SELECT f V : 6 0 . 3 H z
H / C S Y N C : P O S
PICTURE
CTRL V - S Y N C : P O S
S o n G : - - -
INPUT
SETTING I N P U T S I G N A L : R G B
SET
SETTING I N P U T M E M O R Y N o . 1 5
INPUT
INFO.
fH (Horizontal frequency)
Indicates the horizontal frequency of the input signal.
This indication is only used as a reference, this is not
absolute value.
fV (Vertical frequency)
Indicates the vertical frequency of the input signal.
This indication is only used as a reference, this is not
absolute value.
H/C (Horizontal/Composite)-SYNC
Indicates the polarity of the horizontal or the
composite sync. signal. When the picture is being
projected using its sync signal, POS (NEG) is
displayed in green. When the picture is being projected
without using sync signal, POS (NEG) is displayed in
white.
POS: The polarity of the sync. signal is positive.
NEG: The polarity of the sync. signal is negative.
---: No sync. signal is input.
V(Vertical) SYNC
Indicates the polarity of the vertical sync. signal. When
the picture is being projected using its sync signal,
POS (NEG) is displayed in green. When the picture is
being projected without using sync signal, POS (NEG)
is displayed in white.
POS: The polarity of the sync. signal is positive.
NEG: The polarity of the sync. signal is negative.
---: No sync. signal is input.
SonG
Indicates the polarity of the Sync on Green. When the
picture is being projected using its sync signal, NEG is
displayed in green. When the picture is being projected
without using sync signal, NEG is displayed in white.
NEG: The polarity of the sync. signal is negative.
---: No Sync. signal is input.
I N P U T - A
SEL: EXIT: MENU

INPUT SIGNAL

Displays the type of current input signal.
NTSC 3.58: NTSC 3.58 input signal from VIDEO IN
NTSC 4.43: NTSC 4.43 input signal from VIDEO IN
PAL: PAL input signal from VIDEO IN
SECAM: SECAM input signal from VIDEO IN
PAL-M: PAL-M input signal form VIDEO IN
S-VIDEO: S-VIDEO input signal from VIDEO IN
RGB: RGB input signal
COMPONENT: Component input signal
B/W 50: Black and white input signal from VIDEO
IN (vertical frequency: 50 Hz)
B/W 60: Black and white input signal from VIDEO
IN (vertical frequency: 60 Hz)
INPUT MEMORY No.
Indicates the memory number of the INPUT SETTING
data used for current input signal.
Each preset signal is stored in following memory
number.
Memory Preset signal fH(kHz) fV(Hz) Sync
No.
01 Video (60 Hz) –
02 Video (50 Hz) –
03 15k RGB / –
Component(60 Hz)
04 15k RGB/ –
Component(50 Hz)
05 VGA mode3 31.5
06 VESA 72Hz 37.9
07 Macintosh 13" 35.0
separate sync
08 Macintosh 16" 49.7
09 VGA mode1 31.5
10 VGA mode2 31.5
12 VESA 75 Hz 37.5
14 S VGA 56 Hz 35.2
15 S VGA 60 Hz 37.9
16 S VGA 72 Hz 48.1
17 S VGA 75 Hz 46.9
18 S VGA 85 Hz 53.7
19 XGA VESA 60 Hz 48.4
20 XGA VESA 70 Hz 56.5
When signals other than the preset signals are input
and adjusted in the INPUT SETTING menu, they are
stored in memory numbers 23 to 42.
– –
– –
– Composite sync/
Sync on G
– Composite sync/
Sync on G
59.9 H-neg V-neg
72.8 H-neg V-pos
66.7 H-neg V-neg
74.6 H-neg V-neg
70.1 H-pos V-neg
70.1 H-neg V-pos
75.0 H-neg V-neg
56.3 H-neg V-neg
60.3 H-pos V-pos
72.2 H-pos V-pos
75.0 H-pos V-pos
85.1 H-pos V-pos
60.0 H-neg V-neg
70.1 H-neg V-neg
29
(EN)