Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V
............................
~
............................
Hz
............................
W
............................
A
............................
n
............................
0
n
............................
/min ............................
∅
............................
............................
Technical data
Rated input:
Rated voltage:
Power supply frequency:
Weight of tool:
Dimensions (L×W×H):
Minimum distance between wall and hole drilled:
Speed:
Max. permitted water supply pressure:
Other important features:
Protection class:
4
volts
alternating current
hertz
watts
amperes
no load speed
speed under normal load
revolutions per minute
diameter
protective grounding
Description
The DD EC-1 is an electrically-powered diamond core
drilling machine for wet drilling.
Items supplied: The following items are supplied: electric
tool, water collector holder including water collector,
supply cord equipped with GFCI, operating instructions,
lubricant spray (50 ml), cleaning cloth, toolbox.
See figure
and the explanation of operating compo-
nents and tool parts on page 1.
The following conditions must always be observed
when the tool is in use:
– The tool must be connected to an alternating current
electric power supply in compliance with the infor-
mation given on the type rating plate.
– The tool must not be used in places where the sur-
rounding conditions present a risk of explosion.
– The water collector with the correct sleeve must
always be used.
1350 W
120 V
50–60 Hz
5.7 kg (12.5 lbs)
423×108×195 mm (6
5
/
")
36 mm (1
3
/
8
9100 r.p.m.
6 bar / 88 psi (If water pressure is higher, a pressure-
reducing valve must be fitted at the jobsite connection.)
Removable supply cord with keyed socket connector
I, Grounded construction
"×4
"×7
")
1
/
5
/
8
4
8
Right of technical changes reserved
Publicité
Chapitres
Table des Matières
Dépannage
