Description; Accessories; Spare Parts - Hilti SMD 50 Mode D'emploi

Symbols
Return waste Read the
en
material for operating
recycling. instructions
before use.

2 Description

2.1 Use of the product as directed
The SMD 50 magazine is an accessory used for driving
collated screws. The magazine is suitable for use with
the Hilti SF 4000 / SF 4000‑A / SD 2500 / SD 4500
/ SD 5000 / SD 5000‑A22 / SD 4500‑A18 and SD 45
screwdrivers. The magazine and Hilti screwdrivers are
optimally matched to each other.
In the safety rules in these operating instructions, the
designation "power tool" refers to the magazine.
Modification of the power tool is not permissible.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.
To avoid the risk of injury, use only genuine Hilti ac-
cessories and insert tools.
The power tool and its ancillary equipment may present
hazards when used incorrectly by untrained personnel or
when used not as directed.

3 Accessories

Designation
S‑MBL 116 PH2 bit
SME extension

4 Spare parts

SMD 50 magazine 2
2 Magazine unit, complete
3 Depth gauge
4 Magazine spring
2
All manuals and user guides at all-guides.com
Location of identification data on the tool
The type designation and the serial number are stamped
on the rear of the magazine. Make a note of this data in
your operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
department.
Type:
Serial no.:
The power tool is designed for professional use and may
be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of
any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
The working environment may be as follows: construction
site, workshop, renovation, conversion or new construc-
tion.
Working on materials hazardous to the health (e.g. as-
bestos) is not permissible.
2.2 Items supplied as standard
1 Magazine
1 S‑MBL 116 PH2 bit
1 Operating instructions
1 Cardboard box
382905
288253
387674