Hach AMTAX sc Mode D'emploi page 21

Note: The event log records the validation values and average value from the analyzer.
10. Press ENTER to proceed.
11. Select ENTER and modify the instrument to the original analyzer configuration.
12. Start the measurement mode or hold the service mode.
1 Overflow vessel
2 Fitting of sample tube
3 Blind plug
6.7 Shut the analyzer down
No special measures are necessary for taking out of operation for a short period (up to a
week in frost-free ambient conditions).
English
All manuals and user guides at all-guides.com
• For the adjusted number of validation measurements, the values are listed and
the calculated average of this value is displayed.
Note: Press START to confirm the inquiry to return to the measurement process or to the
service mode.
Figure 2 Modification of AMTAX sc
4 Valve block
5 Sample tube
Maintenance
21