Conrad 75 15 49 Notice D'emploi page 52

71 1 #
The factory setting is a deactivated relay activation signal tone.
c) Activating / Deactivating the Key Tone Function
Determine whether the key tones are to be activated or deactivated.
Enter the following key combination to deactivate the key tones:
72 0 #
Enter the following key combination to activate the key tones:
72 1 #
The factory setting is activated key tones.
d) Activate / Deactivate Intruder Alarm and Set Alarm Duration
Basic requirements for an alarm in the case of unauthorised entry
are a sensor (e.g. magnet contact) attached to the "DOOR SENS"
and "GND" clamps.
Also be sure to note the example connection plans at the end of these instructions and
Chapter "6 Connection Plan".
Enter the following key combination to deactivate the alarm:
73 0 #
Enter the following key combination to activate the alarm:
73 1 #
The factory setting is a deactivated alarm.
50
All manuals and user guides at all-guides.com