Publicité
Les langues disponibles
Les langues disponibles
8.11 Function Settings
To carry out this programming step the code lock should now be in
programming mode (see Chapter "8.1 Entering Programming Mode").
a)
Setting Input Method:
You can determine which input method should activate the relay outputs.
Two input methods are available.
Input Method 1:
User code
#
Input Method 2:
User code
Enter the following key combination to set the unit to input method 1:
70 0
#
Enter the following key combination to set the unit to input method 2:
70 1
#
The factory setting is "7-00".
b)
Setting Acoustic Signalling of Relay Activation
You can determine whether a signal tone should be emitted or not when the relay is activated.
Enter the following key combination to deactivate the signal tone when the relay is
activated:
71 0
#
Enter the following key combination to activate the signal tone when the relay is activated
(in this setting a signal tone is emitted for 1 second when the relay is activated):
All manuals and user guides at all-guides.com
49
Publicité
