Publicité
Les langues disponibles
Les langues disponibles
Status
Programming mode
During programming
Conformation of
successful programming
(pressing the key "#")
Alarm status
8. Programming
Before you can use the code lock you need to program it to your individual requirements.
All the required programming steps are explained to you in the following.
8.1 Entering Programming Mode
Enter the following key combination to enter the programming mode:
*
MASTERCODE
As soon as you are in the programming mode the status LED "STATUS" (3) and the sta-
tus LED "PASS" are lit.
Please note that the device exits programming mode automatically if
there is no input for 10 seconds.
8.2 Exiting Programming Mode
You can leave the programming mode by pressing the "*" button.
All manuals and user guides at all-guides.com
"STATUS"
"PASS"
LED (3)
LED (4)
Lit
Lit
Lit
Permanent
blinking
Lit
Lit
Permanent
blinking
#
"AUX"
Acoustic
LED (2)
signal trans-
mitter (11)
2 beeps
Permanent
sound of a
beep
"KEY ACT"
LED (1)
41
Publicité
