Publicité
Les langues disponibles
Les langues disponibles
3. OPERATING THE HOOD (continued)
Controls
(continued):
• Adjusting the timer function:
•
While the blower is not running, press and hold Decrease (-) button over 3 seconds to
enter timer mode. Adjust to desired time by pressing the Increase (+) or the Decrease
(-) button (for minimum of 1 minute to a maximum of 9 minutes). This setting will
be saved immediately.
•
Activating the timer function:
•
While the blower is running, press and hold the Power button for over 3 seconds to
activate Power-off Delay Digital Timer. The Power-off Delay indicator will light up and
Power-off Delay Digital Timer will begin to countdown; when it reaches zero, the
blower will shut down.
• Adjusting the light:
•
Press Light button once to turn lights on and once again to turn lights off.
•
While the lights are off, press and hold Light button for over 3 seconds to adjust the
intensity of the lights. The level of brightness will be stored in system's memory.
CAUTION: DO NOT touch the lights until they are switched OFF and cooled.
Note:
Light settings are independent from other settings (including power-off delay) and lights
have to be manually turned on or off.
Note:
The system saves user configurations. Settings such as light, timer and blower speed will
remain the same the next time it is turned on.
25
Publicité
