ROBBE SZD 54 Manuel D'utilisation page 19

Elevator
I N S T R U C T I O N S A N D U S E R M A N U A L
5 . E L E C T R I C A L C O N N E C T I O N :
6 . F I N A L A D J U S T M E N T S :
Rudder
Now all servos must be connected to the receiver accor-
ding to the sequence of connections of your remote con-
trol system. If your remote control system cannot handle
two aileron servos, the model is supplied with a V-cable for
one receiver channel.
The controller is also connected to the receiver.
Next, all rudder functions and engine control on
the transmitter must be set. In case of rudder de-
Aileron
flections, we recommend that you use the follow-
ing values for your first flight, which you can later
adjust to suit your personal preferences.
ATTENTION: We recommend that you disassemble
the propeller for safety reasons during all adjust-
ment work on the remote control system in order
to avoid injuries caused by e. g. sudden starting of
the engine.
19